Corsair Ml140 140mm Premium Magnetic Levitation Case Fans Review
Normally example fans aren't too heady, only they're a disquisitional slice of whatsoever PC build — and these ones are actually pretty cool. Corsair's new ML120 and ML140 fans utilize magnetic levitation instead of ball bearings, providing zero friction. That should brand them quieter than fans running at the aforementioned speed (or equally, at higher speeds when producing an equal amount of noise). That sounds promising, so permit's run across if Corsair'due south new fans evangelize on their promises.
Pros
| Cons
|
Summary and score
Corsair'due south new ML120 and ML140 fans deliver quieter operation and amend performance than most fans on the market. The new magnetic levitation technology seems to be working wonders, and it's well supported by noise-damping corners and fun LEDs in the Pro and Pro LED models. Replacing every fan in your instance might exist an expensive venture, but these premium fans are worth it.
See Corsair Magnetic Levitation PC fans on Amazon
Features
- Magnetic bearing harnesses magnetic levitation engineering to provide lower noise, higher functioning and a longer lifespan
- Custom rotor design for the perfect balance between high static pressure and loftier airflow, operating flawlessly in the virtually challenging environments
- 1,600 RPM control range gives you lot full control between low dissonance and absolute operation
- Replaceable coloured corners mounted to anti-vibration rubber dampers
- Ultra-bright LEDs in red, white or blue mounted to the center harness
- Box contains fan, 4x cocky-tapping screws
- Requires open 4-pin fan connector
Specifications
- Warranty: Five years
- Fan size: 140 x 25mm
- Catamenia type: Static pressure
- LED color: Blue, Red, White
- PWM control: Aye
- Airflow: 20 – 97 CFM
- Static Force per unit area: 0.two – 3.0 mmH20
- Sound Level: 16 – 37 dBA
- Power Describe: 0.276 A
Variants
The new magnetic levitation Corsair fans are bachelor at 120mm or 140mm sizes. At that place are iii variants at each size: Standard, Pro (with noise-dampening corner pads) and Pro LED (like Pro, but with LEDs in red, white or blue). Here's the full table:
| Standard | Pro | Pro LED | |
| 120mm | ML120 | ML120 Pro | ML120 Pro LED Red ML120 Pro LED White ML120 Pro LED Blue |
| 140mm | ML140 | ML140 Pro | ML140 Pro LED Red ML140 Pro LED White ML140 Pro LED Blue |
Our review unit of measurement is the ML140 Pro LED Bluish, FYI.
Unboxing & Pattern
The ML140 comes in a cheerful yellow cardboard box, well packed to preclude any damage from errant aircraft companies.
Equally well as the fan, you lot'll get four screws, a pair of nil ties and a scrap of warranty information.
Out of the box, the ML140 Pro LED Blue (future: the ML140) immediately looks a bit fancier and more rugged than the average example fan.
Instead of thin and frail-feeling plastic, the ML140 sports a thicker and more than complex design which provides considerable rigidity – you'd struggle to bend this in your hands and wouldn't worry if it dropped on the floor.
The subtle blue outline around the periphery of the middle and the coloured corners match the LEDs built into the center. To reiterate, we've gone for the Blueish option but White and Red (and no LED at all) are also options for the Pro.
The cablevision is mounted to one side, and measures around half a metre in length. This terminates in a 4-pin connector: three pins for power, 1 pin for reporting and controlling RPM.
Overall, it's a good-looking and durable-feeling design.
Build Log
Our test rig is MANTAMACHINE, a mini-ITX organization built into the roomy NZXT Manta case. The instance's front end intake tin can suit 120 or 140mm fans, merely only 120mm fans are provided… then let's upgrade them with these new Corsair fans.
Here are the rest of the organisation'southward specs.
- Intel Cadre i5-6600K processor
- NZXT Kraken X61 liquid cooling
- EVGA Nvidia GTX 1080 FTW
- Asus Z170I mini-ITX motherboard
- Crucial 16GB DDR4 2400MHz RAM
- Samsung 128GB Evo 850 Plus Thousand.ii SSD
- Western Digital Greenish 3TB HDD
- Enermax 600W PSU
Thank you to NZXT for providing the Manta instance and Kraken X61 liquid cooler. Thanks to Samsung for providing the Evo 850 M.2 boot drive. Cheers to Zoostorm and Crucial for providing the DDR4 RAM.
We started by removing both sides and the front of the case, giving the states access to the innards. We removed the front filter was removed (and cleaned it), then unplugged, unscrewed and uninstalled the original pair of 120mm fans (in that order).
Next, we investigated the power situation. The fan controller card simply sports three pin connectors and our motherboard fan connectors are occupied, and so nosotros'll apply iv pin connectors connected directly to the power supply instead.
Each fan has a lovely long cablevision (almost one-half a metre), so it was no problem to road the power cables through the dorsum side of the example and into the maelstrom of PSU cables in the lower quarter of the example.
Once plugged in, it's time to actually install the fans. Despite moving from 120mm to 140mm, the fans still fit easily next to our existing components. We placed the bottom fan first, screwed it in, then the next i affluent on top of it and screwed that in as well.
With the fans installed, it was time to plow on the PC and see what differences in noise and performance we could find!
We ran into a slight issue on that showtime boot: none of our USB devices worked once Windows booted — definitely odd. After several BIOS option changes, we discovered the USB 3.1 ports however worked, then we used those to log into Windows and re-enable the (mysteriously disabled) USB ports in Device Manager. Nosotros've faced no issues since, and we retrieve information technology was due to running the PC without anything plugged in club to take photos. We don't think information technology was related to the fans, simply it's worth mentioning here only in case.
Testing
Temperatures
We recorded temperatures at idle and under load using Corsair Link before and after the new fans were installed. The results are tabulated below; click the image to overstate.
Compared with our previous fans, we saw an subtract in temperature of near 3-four degrees beyond the lath at idle, and 1-2 degrees under load. Of course, temperatures are but one one-half of the story — let'due south take a expect at dissonance levels.
Noise
We used the Decibel 10th app and an iPhone 6 Plus to measure the racket levels of the test rig before and after the new fans were installed, at idle and under load. Measurements were made six inches from front of the PC, where the fans were installed.
Earlier installation, audio levels were 47dB at idle and 50dB under load. After installation, sound was measured at 45dB at idle, and 50dB under load; a small net improvement.
Due north.B. XSReviews is a small-scale functioning; we don't have specialised equipment to precisely measure out airflow and noise. For more precise testing, please check out ThermalBench's excellent review.
Wrapping up
Corsair's magnetic levitation fans are pretty sweet. We wait forward to what they can do with the aforementioned engineering science in the time to come — hopefully these units come up downwards in price and we run into even fancier options at the high cease, like RGB backlighting or more advanced controls. For now, these fans are definitely worth considering, alongside other high-cease options like Noctua's premium range. If you want the latest tech and some pretty colours, the ML120 and ML140 are hard to crush.
Run into Corsair Magnetic Levitation PC fans on Amazon
Source: https://xsreviews.co.uk/reviews/coolers/corsair-ml120-ml140-pro-review-maglev-tech-meets-the-humble-case-fan/
Post a Comment for "Corsair Ml140 140mm Premium Magnetic Levitation Case Fans Review"